Does absence have flesh? I asked my body.
Only the one you created, it said in return."
~ Shinji Moon, The Anatomy of Being
"Once, I had tried to fill myself. I plastered caulk over my emptiness. I filled my body with cement. Rubber glue, love letters, Broken things. I tried to fill the emptiness with those which that only had holes in them...
Does absence have flesh? I asked my body.
Only the one you created, it said in return."
~ Shinji Moon, The Anatomy of Being
In one week I leave for Anderson Ranch to take a two week workshop...because I will not be back until the day before school begins, I had a large list of things to complete before heading to CO. I have collected the majority of the materials I will need for my frescos and some of them are on their way to me! I may be able to have samples of the mineral dust shipped to me so I can at least test with it before committing to finding a large amount to purchase. I cleaned an organized my studio and completed installing my wall easel in my space and I am looking forward to using it. The wall easel will be so helpful to my work and make my studio space much more efficient. Fresco, like ceramics, is very labor intensive. I wanted to complete some of those tasks and material preparation ahead of time, so that upon my return from CO I could jump into making. I mixed lime putty and washed and dried my sand.
Lime putty typically needs atlas 3 months to mature before use…unfortunately I doubt the beginning of the school year and the intensity will allow me to let it sit around. So, I wanted to begin mixing it as soon as possible! It can be used before 3 months but the consistency will be more whipped vs. compact and dense and potentially harder to use. I will have to test it out.
I also needed to prepare the sand that I would be using while waiting for mineral dust. In place of mineral dust I can use sand…it will not be as white or have the sparkle that a mineral dust fresco has, but it’s something to begin with! I bought sand from Lowes as well as a construction store…though both of them are Quikrete All-Purpose, they actually have big differences. I am attempting to get in contact with Quikrete to speak to them about this. It could just be that they are coming from different locations…Mike did tell me that the sand will vary on your location and that from which they get their shipment from. The sands will be sifted when I mix materials for the plaster. Different layers require different mesh #’s.
The final task on my list was to create some test tiles to use for testing the clay bodies and absorbencies for my fresco research. I will be testing multiple clay bodies (about 4 at this moment) at various temperatures. There are a combination of low fire red ware (which I am told may work best), a mid range porcelain, and two high fire stonewares. Some with large amounts of grog and others with almost no grog. The various textures will allow the fresco to hold better to the surface. I saved a few test tiles to bisque later after seeing the results from my first buon fresco tests.
I have ordered a glass muller and my starter pigments for painting the buon fresco. The muller and glass will be used to mix my pigments. I purchased the pigment from Sinopia. I have also purchased the tools that I will need for the fresco.
My main goal while attending workshops at Arromwont this summer was to learn things I had never experienced before and that were slightly outside my material, but that I could continue to incorporate into my work once returning to UF. The second workshop at Arrowmont was Mold Making with Paul Andrew Wandless where we practiced techniques of creating latex molds, silicone rubber molds, and casting wax, cement, plastic, and paper pulp press molds. I learned many valuable techniques that I can continue to use in making my own work. I had never really had the opportunity to learn much about mold making prior to this and Paul was a fantastic instructor and this course was actually the first time he combined all of these techniques into one workshop. He has taught many workshops, but typically when Paul teaches a mold making course, plaster and rubber are separate workshops. I admired his ability to fit in so many mold making practices in such a short period of time! There was also great collaboration between a lot of the workshops and instructors that week which allowed us the chance to incorporate paper pulp into our work. I will attempt to consolidate all that I learned into images throughout this post.
You can click on the images to read the description….
Paul taught me a different method of plaster molds. Usually one is taught the “island” technique of plaster mixing. His was the method of weighting the plaster and water.
Rubber Latex Mold
One of the first materials we worked with to create molds was rubber latex (Rub-R-Mold). This type of mold is great for one part molds, small objects, and ones with complex forms. The valuable characteristic about a rubber latex mold is its ability to be flexible. It can be turned inside out, twisted, popped, and causes no damage to the mold if made properly. This allows for complex forms casted to be removed with ease. Paul had us bring with us small objects that were fairly complex so that we could learn the techniques necessary for mold making. I brought a small pendant and a sculpture of a toro. You can use this with leather hard or bisque ware as well.
Silicone Rubber Mold
We used many different products to create molds and the Silicone Rubber #30 by Smooth-On was very effective. Our first task was to create a plasticine form to create our mold from. We used chip board again to create a barrier for our mold and once poured it took about 6 hrs to cure, but I let it sit overnight.
Wax, Liquid Plastic, and Cement Casting
We used our Silicone Rubber mold to create many types of castings. White Liquid Plastic #300 by Smooth-On was used. We also learned to cast Wax (Paraffin) and Cement (Quikrete.) A neat trick when casting the liquid plastic is to pour water in the mold first so you can determine how much material you may need to mix up. Always use gloves when mixing the plastic! If you plan to paint your plastic you can apply a thin layer of gesso to the surface to help many paints adhere to the surface. You will want a cement with no large particles and no aggregate! If you are creating outdoor sculpture you can add a fortifier to strengthen your cement. Paul stressed that you store your molds together so that the surface inside does not change and that the mold continues to fit together properly.
Paper Pulp Press Molds
We created press molds and plaster molds to cast paper pulp. I found the bisque press molds to be more effective than the plaster molds. They seemed to dry out the paper faster, where the plaster castings took much longer to dry. You can also use the latex mold but the moisture must be sponged out since it is not absorbant. Once the paper has dried completely it is surprisingly very durable!
Paper pulp can be created by many materials. You can use paper towel and toilet paper as a cheaper material. We created molds from cotton, denim, and old t-shirts too but those were mixed with the proper machine and technique. The paper towel and toilet paper can be mixed with a basic blender and water.
The paper will only adhere properly if you consider it like clay. The pulp must be of the same consistency and with similar amounts of water for them to bond strongly.
Some References From Paul...
Buon fresco is a very labor intensive art form…and in many ways is very similar to ceramics. That being said, it was the perfect workshop for me to take this summer, especially in preparation for the fall. While there is so much information and process involved, I will try my best to summarize what it is that I learned. If you would like more detailed information you can visit the website, created by my instructor Michael Nichols, buonfresco101.
In the workshop we created two types of frescos. One on a large wall structure and the others on small ceramic tiles. There is a cement mixture that is referred as the “scratch coat,” which is only really needed for large structured frescos and is lime, sand, and cement. The main key for fresco is that the plaster has something textured and absorbent to hold on to. The second layer applied is called the “brown layer” which consists of sand and lime. The final layer on a fresco is the “painting coat.” This is lime and very fine sand or instead of lime you can use marble dust which gives a whiter and almost sparkling surface. The amount of water used in your fresco layers determines the amount of time you have before curing begins. When the surface cures a chemical reaction occurs creating crystals on the surface of your fresco which seals the pigment into the plaster!
The images you see below are a compilation of the steps we took in creating the large wall fresco. Michael taught us this specifically to experience joining two sections of fresco. "Giornata" is a term, originating from an Italian word which means "a day's work." This describes the daily segments of the painting.
For your small ceramic tiles the “brown layer” is not necessary but it is important to polish the surface carefully. I struggled with timing this properly and unfortunately there were certain areas of my fresco that did not take the pigment.
The next step in creating your fresco is the image transfer which I spoke about a bit in my previous post. You can apply your image through “pouncing” with charcoal dust or you may use tracing paper and apply pressure with a rounded point. Both of these techniques will effectively leave a tracing of your image…it’s just a matter of which you prefer.
Painting buon fresco is all about timing and knowing when the surface is ready for the next step. The layers must be absorbent and be able to immediately take the pigment into its surface. You will be able to know when you are ready to paint if the water in your brush is absorbed. You will paint your image with a subtle “verdaccio” or underpainting in order to have an idea of the values as you paint. Remember that you only have maybe a 5 hour window of time to paint before your fresco cures!
When painting you must use pigments mixed with distilled water only. Regular water should be avoided when painting fresco and the milk from your lime can be used to create opaque layers. The beauty of fresco is the amount of layers painted through time to create colors and tones. We practiced a great deal painting indirectly…meaning creating an area of green by applying transparent layers of yellow and blue over one another. You must NEVER paint over the same area twice and too soon. The fresco needs time to absorb the color, and painting too quickly and too often can damage the crystals on the surface and the absorbency of your fresco.
Once you have finished painting your fresco you must allow it to cure for atleast two days before attempting to wash it under water. If painted correctly and like a true buon fresco, the pigment will not move during the rinsing. It is not necessary to wash your fresco, but is an exciting experience! Some fresco artists will finish their piece with a wax layer (but only if you have not rinsed your fresco) which helps to create a smoother finished surface.
This was a very simplified write up of the basic steps necessary to create a buon fresco...there are so many more details and processes involved. We created the majority of our own materials which also helped immensely with cost.
My buon fresco class has finally begun! I have already learned a great deal about this difficult and historical technique…Buon fresco takes patience, practice, and great skill. While I am still learning the basics of this historical art form, I wanted to share some of the resources available to those interested in it.
I am taking the workshop with the talented Michael Nichols who spoke of the fresco community as a small one, though it seems he has done a fantastic job creating the beginnings of a fresco network through his blog Buon Fresco 101. Within this site you will find information about the artists working with buon fresco, resources, information about materials, as well as the history of Buon Fresco.
In the workshop we will be learning the traditional technique of buon fresco used by Diego Rivera for the many historical and breathtaking frescos he created across the world. I was excited to hear this and see Nichols refer to many of his murals, some I have seen while living in Mexico! Nichols explained that the technique of Buon Fresco can be very traditional and rigid in a sense, though there are modern and contemporary artists out there doing new and interesting things with it.
During the beginning of the workshop while Nichols explained the process of creating the plaster tile/structure for buon fresco I immediately began to construct ideas of how this could be applied to my own work…especially my ceramics. Can I create my own armature to then fresco onto, creating a 3 dimensional fresco? YES! Barbara Sullivan is an artist Nichols referred me to. Can I create pieces that are part ceramic (glazed) and part fresco? I think so!! I am learning that the most important part of applying the plaster is that the surface have tooth/texture. There is also an artist that Nichols explained has explored sealing the fresco he painted in a bowl and filling it with water! I have a lot of ideas and it will take time and experimentation to see what I can accomplish.
For this first blog I would like to share the beginning stage of my sketches I have created for the course. Later I will write about the process we used to create our own plaster for fresco. Nichols will be teaching us the simple way of applying the plaster to the back of ceramic tiles, as well as the larger version and stronger support of creating our own frame and structure to then apply the plaster in multiple layers.
The images below show my beginning drawings that must remain simple black and white for the moment. It is important that the different values are easy to identify.
These images show the process of tracing these on to tracing paper to later be transferred onto the fresco surface. You can see the subtle indentation of the image on the painting layer and I had begun painting the "verdaccio" which is the underpainting usually done in a yellow greenish color. Diego Rivera used a black verdaccio for his frescos.
Michelangelo used the technique we will try which is pushing pin holes into the drawing to then pound gently a charcoal powder…leaving the charcoal line on the fresco surface. This is called “spolvero” or “pouncing.”
For the summer of 2016 I will have the opportunity to work diligently within my own studio as well as nationally. I will spend this summer at Arrowmont School of Arts and Crafts and Anderson Ranch. The workshops will consist of Buon Fresco: The Act of Painting onto Wet Plaster with Michael Nichols as well as the Introduction to Mold Making: Small One Part Molds and Sprigs with Paul Andrew Wandless. During my time at Anderson Ranch I will attend the workshop Hand Built Vessels: Clay as Canvaswith John Gill, Andrea Gill, and Stuart Asprey. All three of these workshops will expand my knowledge and visual vocabulary in my areas of interest and introduce me to new techniques within my practice as an artist.
The goal is to approach my work in terms of “form as canvas” and develop its ability to communicate my ideas of the body and clay through the process of making and narrative. I will dedicate one month in between each workshop reflecting on the techniques and materials I had worked with and incorporating them within my own body of work. There will be extensive practice and problem solving to unify my ideas of image, surface, and form. How can I develop a form to be utilized as canvas, and how can I elaborate on that to build a language through my surface application and design? These will be the questions approached within my daily studio time.
In the completion of my first year, I developed surface through the porcelain clay body, combinations of throwing and hand building, illustrative techniques such as mono-printing, and extensive testing of glazes and firing schedules. All of these will remain strong within my act of making and researching. I will continue to approach the idea of two and three dimensional space in the relationship and presentation of my work as well as expand my knowledge on mixed materials and their significance.
I look forward to the opportunity to research, explore, collaborate with new artists, and expand my work in order to better communicate my ideas and represent myself as a clay artist. This summer spent traveling and working will benefit my graduate studies, studio work, and professional practices in new and applicable ways.
To follow my summer work as well as the other graduates at UF please visit our blog!!
This work is a desire to document the body. A desperate effort to create a memory within form, touch, and material.
Clay as material is malleable and easily manipulated. With slow and precise steps, I coiled and pinched the red earthenware clay into a hollow, pillow like form. Immediately after building the voluminous body of clay, I hugged each
pillow while still soft. The clay forms adhered to my body and reflect the shapes of my arms embracing and my hands gripping, as I gently applied pressure to hold close and shape each pillow.
Objects that keep our marks. Our bodies that reflect memory. Our surfaces that depict use and time.
Things Shouldn't Be So Hard
by Kay Ryan
A life should leave
ruts where she
went out and back
to get the mail
or move the hose
around the yard;
where she used to
stand before the sink,
a worn-out place;
beneath her hand
the china knobs
rubbed down to
the switch she
used to feel for
in the dark
Her things should
keep her marks.
of a life should show;
it should abrade.
And when life stops,
a certain space--
should be left scarred
by the grand and
be so hard.
"Let’s begin here - at the skin. Pay attention to the story. A tale of lovers leaving port without words, with ships full of cargo, migrating from body to body, from flesh to flesh. This is a documentation of the human form: how we discover it, how we allow it to be discovered, how we love contours and knuckles and consume selfishly and sinfully - trying in vain to map out our primitive cartography without knowing what names to give the things that we love the most."
~ Shinji Moon
The Anatomy of Being
I've been exploring sculpture in my studio...thinking of form, memory, impression, and skin.
“Rilke wrote: 'These trees are magnificent, but even more magnificent is the sublime and moving space between them, as though with their growth it too increased.”
~ Gaston Bachelard, The Poetics of Space
My time in the studio has me creating some new works considering the language between form and image, as well as the space within my figures exist. Seeing these pieces as more paintings than pots, I am pushing the limits of the utilitarian object and observing the depth I can create through form and the image of the figure. The surface these characters are placed within is important. How do all of these interact and then how do they encourage the viewer or user to interact? Am I encouraging the user to handle the work with delicacy due the fragile rim that outlines the body of portrait? I plan to push this idea with the addition of gold luster and soft edges. A thought to the fragility that resides within our bodies, our relationships, and our existence.
"I don't know where to begin because I have nothing to say, yet I know that before long I will sound as if I am on a crusade."
~ Mary Ruefle
My first semester of graduate school has ended. It's been a journey in balance...While it has been an experience to return to school full time, it's been challenging and refreshing all the while. I'm learning not just a strong studio practice, but as well as a life practice. I'm learning to talk about my work in a deeper sense and to ask more questions about it or embrace those questions not yet answered. There is nothing glamorous about this, and while I struggle on those days or weeks of absolutely no sleep...I still feel very fortunate to be here and very excited to see what comes of my work. How will it develop? How will it improve? How will I change? And what answers will I find along the way?
I've changed clay bodies recently and begun to work with a mid range porcelain...and I love it! Through the studio practices I had, the sgrafitto I was doing, and the results I was getting; I began to discover that the porcelain was giving me the exact surface I was interested from beginning until the end. A white canvas, subtle colors, and a soft surface to match the soft forms of my figures.
I have also begun doing a lot of mono-printing with my sketches. Slip trailing and painting the images on news print to then transfer on to the clay surface. Thinking also about a sense of "interior life" and the interior of my vessels, as well as altering the forms I make to fit the fluid and organic motion of the body and image. Space, movement, line, and touch seem to be prominant in my work...I'm curious to see how this develops while in school.
Here are some images documenting the processes I have been exploring...food coloring has also played a role in how I work out design.
The last grouping of work to be fired for my final crit had some glaze mishaps....I lost detail in the images due to thickness and had crawling or dry surfaces. Just like ceramics to constantly be keeping me on my toes. Next semester will hopefully be filled with time developing glazes and experimenting-- I've already got the test tiles ready to go!